Wireless WMPG-4 (RESOLVED)

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Gixer
Posts: 45
Joined: Tue Jun 30, 2020 3:18 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0324202376
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Wireless WMPG-4 (RESOLVED)

Post by Gixer »

Hi All.
I`ve got a problem with my wireless mpg-4 everything works ok except the x,y,z on the dial,feed and spindle speed work ok on the dial but if i switch it to x,y,z the dial does`nt work but everthing else will move the x,y,z.If you need anymore info let me know thats the potention meter i refer to as the dial.
Cheers
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Wireless WMPG-4

Post by cnckeith »

hi, not sure what issue you are describing can you shoot a video of what you are experiencing?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Gixer
Posts: 45
Joined: Tue Jun 30, 2020 3:18 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0324202376
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Wireless WMPG-4

Post by Gixer »

Hi here`s a video in the link let me know if it does`nt work.
https://photos.app.goo.gl/JnaXdyemDEXqB3SQ8
cheers
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Wireless WMPG-4

Post by cnckeith »

hi thanks. please post a fresh report.zip so i can see your settings and error messages.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: Wireless WMPG-4

Post by cncsnw »

Gixer,

do the axes move using the handwheel, if you switch the increment selector to the x1 (lowest) position?
Gixer
Posts: 45
Joined: Tue Jun 30, 2020 3:18 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0324202376
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Wireless WMPG-4

Post by Gixer »

cnckeith wrote: Sun Mar 07, 2021 1:44 pm hi thanks. please post a fresh report.zip so i can see your settings and error messages.
Hi here`s my report hope it helps.
Attachments
report_0008DC111213-0324202376_2021-03-08_12-09-05.zip
(5.9 MiB) Downloaded 104 times
Gixer
Posts: 45
Joined: Tue Jun 30, 2020 3:18 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0324202376
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Wireless WMPG-4

Post by Gixer »

cncsnw wrote: Sun Mar 07, 2021 5:32 pm Gixer,

do the axes move using the handwheel, if you switch the increment selector to the x1 (lowest) position?
Hi no they don`t everything else on the wmpg works but the axes switch but if i switch the axes switch to off you can see that works on the virtual key pad as i switch it to off then on.

Cheers
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Wireless WMPG-4

Post by martyscncgarage »

Parameter 348 needs to be set to 15, it is currently set to ZERO
Try that and let us know.

See Tech Bulletin 313: https://www.centroidcnc.com/centroid_di ... browse.php
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Gixer
Posts: 45
Joined: Tue Jun 30, 2020 3:18 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0324202376
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Wireless WMPG-4

Post by Gixer »

martyscncgarage wrote: Mon Mar 08, 2021 11:48 am Parameter 348 needs to be set to 15, it is currently set to ZERO
Try that and let us know.

See Tech Bulletin 313: https://www.centroidcnc.com/centroid_di ... browse.php
Hi Marty thanks for the quick fix it`s all working again i don`t know how it changed not been in the parameter settings for ages.
Anyway thanks again for the help everyone much appreciated .
Paul
jedmill67
Posts: 11
Joined: Sat Aug 08, 2020 10:43 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Wireless WMPG-4

Post by jedmill67 »

cncsnw wrote: Sun Mar 07, 2021 5:32 pm Gixer,

do the axes move using the handwheel, if you switch the increment selector to the x1 (lowest) position?
I just got the acornsix and my WMPG-4 is doing just what was asked about above. The WMPG-4 will do everything like it should except when it comes time to use the handwheel to jog the axis it will only move them when the selector is set to 1X. If I try 10X or 100X I get no movement. I looked at service bulletin 313 and made sure parameter 348 was set to 15. still the same thing. Any thoughts?
Post Reply