HI,
Any guide on this will be appreciated.
I am using a rotary selector for the axis and the wiper signal should I take it from COM negative ? Attached is the image from your drawings which I have wired all but left is the return signal to tell control on which axis is selected. same will apply to the jog speed and LED
I have added 2 more buttons to my cabinet for cycle start and feed hold. any idea on how to wire them to input and assign them as buttons?
was stuck on the home switch but Marty's video has help, as axis reversal, will swap the wire of limit switch tomorrow.
if you out there thanks a ton Marty for you efforts in explaining.
will update my progress on my other post soon.
Thanking you all in advance.
Manni
Haas VF-1 1994 Retrofit to Centroid Allin1DC - Custom MPG & Buttons - *Solved*
Moderator: cnckeith
-
- Posts: 25
- Joined: Sun Jan 24, 2021 2:58 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Walsall - UK
- Contact:
Re: Haas VF-1 1994 Retrofit to Centroid Allin1DC - Custom MPG & Buttons - *Solved*
got it figured out, my machine is near to completion.
Will upload my progress in my other post.
Will upload my progress in my other post.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Haas VF-1 1994 Retrofit to Centroid Allin1DC - Custom MPG & Buttons - *Solved*
Great, do let us know what you did.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 25
- Joined: Sun Jan 24, 2021 2:58 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Walsall - UK
- Contact:
Re: Haas VF-1 1994 Retrofit to Centroid Allin1DC - Custom MPG & Buttons - *Solved*
add the wiper wire of rotary switches, 1 for axis and 1 for speed both wires to 5vdc COM.
also you can add a led for each axis/speed selected.
also you can add a led for each axis/speed selected.