Haas VF-1 1994 Retrofit to Centroid Allin1DC - Custom MPG & Buttons

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
manni
Posts: 15
Joined: Sun Jan 24, 2021 2:58 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none
Location: Walsall - UK
Contact:

Haas VF-1 1994 Retrofit to Centroid Allin1DC - Custom MPG & Buttons

Post by manni »

HI,

Any guide on this will be appreciated.

I am using a rotary selector for the axis and the wiper signal should I take it from COM negative ? Attached is the image from your drawings which I have wired all but left is the return signal to tell control on which axis is selected. same will apply to the jog speed and LED


I have added 2 more buttons to my cabinet for cycle start and feed hold. any idea on how to wire them to input and assign them as buttons?

was stuck on the home switch but Marty's video has help, as axis reversal, will swap the wire of limit switch tomorrow.

if you out there thanks a ton Marty for you efforts in explaining.

will update my progress on my other post soon.

Thanking you all in advance.

Manni
Attachments
MPG Wiring.JPG
wiring.jpg
images (1).jpg
images (1).jpg (5.59 KiB) Viewed 36 times
20210218_133323.jpg
Post Reply