I am on version 4.14 m400 allin1.
I can't decide what is my path on this page.
https://www.centroidcnc.com/centroid_di ... loads.html
Am I supposed to pay for 4.16 or 4.18 or not?
cnc 12 version update
Moderator: cnckeith
-
- Posts: 112
- Joined: Fri Apr 13, 2018 10:04 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 101981
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
cnc 12 version update
Dave Koehler
https://www.koehlerinjection.com
https://www.koehlerinjection.com
-
- Posts: 3101
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: cnc 12 version update
Depends on how long ago you bought ypur AIO. Less than 18mo and it's free. More than that and you have to pay a minimal fee, but chances are you'll come out ahead because of a few new options you'll gain.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Re: cnc 12 version update
I thought the structure was, less than 18 months and it's $99, more than that and it's $299.
Perhaps Keith can clarify.
Perhaps Keith can clarify.
-
- Posts: 3101
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: cnc 12 version update
You are right. Pro version upgrade is $99 for 18mo or less, $299 for longer, and $299 for ultimate if you already have an Ultimate level item unlock, otherwise +$450 to go from pro to ultimate.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 573
- Joined: Wed Aug 29, 2018 11:15 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 985DADEB24D5-0309180716
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: cnc 12 version update
Looks like the Upgrade Page has not been updated:
It still says CNC12 v4.16 instead of v4.18.
-swissi
It still says CNC12 v4.16 instead of v4.18.
-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
-
- Posts: 7327
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: cnc 12 version update
hi, thanks.
i put a + in front of v4.16. so now it reads v4.16+ as the license file works with v4.16 and v4.18 , same license file works with both versions and will continue to be that way until there is a major release.
i put a + in front of v4.16. so now it reads v4.16+ as the license file works with v4.16 and v4.18 , same license file works with both versions and will continue to be that way until there is a major release.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html