New centroid servo cable question

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Craig
Posts: 18
Joined: Tue Nov 24, 2020 9:34 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: A900928

New centroid servo cable question

Post by Craig »

My new servo cables showed up from Centroid, they have 3 wires and what I’m replacing has 5, I show 4 in the picture, what’s not seen is the ground wire.
2273F155-FF41-4325-9A20-FF1FB6B428C8.jpeg
How does this work?
cncsnw
Posts: 1897
Joined: Wed Mar 24, 2010 5:48 pm

Re: New centroid servo cable question

Post by cncsnw »

Centroid does not use the tachometer, so you can ignore the thin white and black wires.
Craig
Posts: 18
Joined: Tue Nov 24, 2020 9:34 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: A900928

Re: New centroid servo cable question

Post by Craig »

Excellent thank you!

I suppose Centroid sells the male version of the female end they sold me
87ED158F-7318-45B6-97FE-B9E4ADF24F97.jpeg
96EE6449-A848-4FB9-AF5E-50038115F841.jpeg
martyscncgarage
Posts: 7523
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: New centroid servo cable question

Post by martyscncgarage »

Craig wrote: Sun Feb 21, 2021 9:32 pm Excellent thank you!

I suppose Centroid sells the male version of the female end they sold me
87ED158F-7318-45B6-97FE-B9E4ADF24F97.jpeg96EE6449-A848-4FB9-AF5E-50038115F841.jpeg
That connector mates with Centroid Servos.
You can cut it off and use insulated spade connectors on the -/+ wires and use a ring terminal on the ground wire.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
tblough
Posts: 1347
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
Location: Boston, MA
Contact:

Re: New centroid servo cable question

Post by tblough »

You can also get the mating housing and contacts from Digikey.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Post Reply