What Is the recommended AC power input current protection for the CAPboard at 110 vac input (no Transformer). I guessed at a 16 amp circuit breaker with a "D" curve.
PS, Would someone please answer my recent post on Generic probe wiring?
AC power input current protection for the CAPboard
Moderator: cnckeith
-
- Posts: 78
- Joined: Tue Apr 17, 2018 8:58 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: AC power input current protection for the CAPboard
15amp with 14 gauge wire is standard on the allin1dc. Use slow blow fuse or breaker for surge capacity. D curve sounds right.
-
- Posts: 57
- Joined: Wed Jan 06, 2021 1:05 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: console 104030 SysId 0008DC111213-1202202505
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Mims Florida
Re: AC power input current protection for the CAPboard
Thanks, I had a hard time finding a 15, but easily found a 16. Should I be concerned?