AC power input current protection for the CAPboard

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
cncot
Posts: 57
Joined: Wed Jan 06, 2021 1:05 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: console 104030 SysId 0008DC111213-1202202505
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Mims Florida

AC power input current protection for the CAPboard

Post by cncot »

What Is the recommended AC power input current protection for the CAPboard at 110 vac input (no Transformer). I guessed at a 16 amp circuit breaker with a "D" curve.

PS, Would someone please answer my recent post on Generic probe wiring?
AcornJosh
Posts: 78
Joined: Tue Apr 17, 2018 8:58 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: AC power input current protection for the CAPboard

Post by AcornJosh »

15amp with 14 gauge wire is standard on the allin1dc. Use slow blow fuse or breaker for surge capacity. D curve sounds right.
cncot
Posts: 57
Joined: Wed Jan 06, 2021 1:05 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: console 104030 SysId 0008DC111213-1202202505
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Mims Florida

Re: AC power input current protection for the CAPboard

Post by cncot »

Thanks, I had a hard time finding a 15, but easily found a 16. Should I be concerned?
Post Reply