AC power input current protection for the CAPboard

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
cncot
Posts: 7
Joined: Wed Jan 06, 2021 1:05 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

AC power input current protection for the CAPboard

Post by cncot »

What Is the recommended AC power input current protection for the CAPboard at 110 vac input (no Transformer). I guessed at a 16 amp circuit breaker with a "D" curve.

PS, Would someone please answer my recent post on Generic probe wiring?
AcornJosh
Posts: 59
Joined: Tue Apr 17, 2018 8:58 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: AC power input current protection for the CAPboard

Post by AcornJosh »

15amp with 14 gauge wire is standard on the allin1dc. Use slow blow fuse or breaker for surge capacity. D curve sounds right.
When requesting support READ THIS POST first. viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply