OAK with DYN4 showing encoder errors <resolved>

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

martyscncgarage
Posts: 7498
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: OAK with DYN4 showing encoder errors

Post by martyscncgarage »

jonathan@twente-am wrote: Wed Feb 17, 2021 12:48 pm I'm building a gigantic 3D Printer for construction
YEs counterweighted head, but I'll add a brake resistor if needed

I will actual have dual Xaxis and then a Zservo with break.
Setup picture will follow in a month or so.

Noted for the Reactor.
Awesome, looking forward to seeing how this works out. Very interested to see the machine in action when you can post information!
Kindest regards,
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply