Haas VF-1 1994 Retrofit Allin1DC - Progress update

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
manni
Posts: 12
Joined: Sun Jan 24, 2021 2:58 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none
Location: Walsall - UK
Contact:

Haas VF-1 1994 Retrofit Allin1DC - Progress update

Post by manni »

Hi,

This post is dedicated to my progress so all my updates will be here as I have another post with question where I get stuck. ;) .
Attachments
haas monitor v26.jpg
haas-vf-restore.jpg
manni
Posts: 12
Joined: Sun Jan 24, 2021 2:58 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none
Location: Walsall - UK
Contact:

Re: Haas VF-1 1994 Retrofit Allin1DC - Progress update

Post by manni »

Got the front control display back from laser cutting and did a test fit of monitor and keyboard before sending it off to powder coating.
will have more update on progress by this weekend.
Attachments
20210209_165229.jpg
20210209_165235.jpg
20210209_152120.jpg
manni
Posts: 12
Joined: Sun Jan 24, 2021 2:58 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none
Location: Walsall - UK
Contact:

Re: Haas VF-1 1994 Retrofit Allin1DC - Progress update

Post by manni »

Removed old components and labelled the wires. plan is once the display unit comes back from powder coating will start off with Computer unit & Software then all servo motors test before connecting them to Allin1DC.
Attachments
20210204_121338.jpg
20210204_121338.jpg (14.79 KiB) Viewed 123 times
20210204_121259.jpg
20210204_121259.jpg (12.6 KiB) Viewed 123 times
20210204_120945.jpg
20210204_120945.jpg (12.14 KiB) Viewed 123 times
20210204_120937.jpg
20210204_120937.jpg (10.42 KiB) Viewed 123 times
20210204_120927.jpg
20210204_120927.jpg (11.87 KiB) Viewed 123 times
martyscncgarage
Posts: 7489
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Haas VF-1 1994 Retrofit Allin1DC - Progress update

Post by martyscncgarage »

Plow on!
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
manni
Posts: 12
Joined: Sun Jan 24, 2021 2:58 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none
Location: Walsall - UK
Contact:

Re: Haas VF-1 1994 Retrofit Allin1DC - Progress update

Post by manni »

Hi,

My this week progress. didn't get much time on this, finally at the stage of power up. Still have few more checks.
will take more image of last 2 days work over the weekend.

The estop turned out too small so I have swapped it to the normal size.
Tried my best to keep wiring tidy as best as I can.

any mistakes you guys spot let me know.

Thanks
Manni
Attachments
20210218_133323.jpg
20210218_133306.jpg
20210218_133302.jpg
20210218_133259.jpg
20210218_133256.jpg
20210218_133252.jpg
20210213_144651.jpg
20210213_144600.jpg
20210213_144544.jpg
20210213_144503.jpg
Post Reply