This post is dedicated to my progress so all my updates will be here as I have another post with question where I get stuck.
.Haas VF-1 1994 Retrofit Allin1DC - Progress update
Moderator: cnckeith
-
manni
- Posts: 15
- Joined: Sun Jan 24, 2021 2:58 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: none
- Location: Walsall - UK
- Contact:
Haas VF-1 1994 Retrofit Allin1DC - Progress update
Hi,
This post is dedicated to my progress so all my updates will be here as I have another post with question where I get stuck. .
This post is dedicated to my progress so all my updates will be here as I have another post with question where I get stuck.
.- Attachments
-
-
-
manni
- Posts: 15
- Joined: Sun Jan 24, 2021 2:58 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: none
- Location: Walsall - UK
- Contact:
Re: Haas VF-1 1994 Retrofit Allin1DC - Progress update
Got the front control display back from laser cutting and did a test fit of monitor and keyboard before sending it off to powder coating.
will have more update on progress by this weekend.
will have more update on progress by this weekend.
- Attachments
-
-
-
-
manni
- Posts: 15
- Joined: Sun Jan 24, 2021 2:58 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: none
- Location: Walsall - UK
- Contact:
Re: Haas VF-1 1994 Retrofit Allin1DC - Progress update
Removed old components and labelled the wires. plan is once the display unit comes back from powder coating will start off with Computer unit & Software then all servo motors test before connecting them to Allin1DC.
- Attachments
-
- 20210204_121338.jpg (14.79 KiB) Viewed 134 times
-
- 20210204_121259.jpg (12.6 KiB) Viewed 134 times
-
- 20210204_120945.jpg (12.14 KiB) Viewed 134 times
-
- 20210204_120937.jpg (10.42 KiB) Viewed 134 times
-
- 20210204_120927.jpg (11.87 KiB) Viewed 134 times
-
martyscncgarage
- Posts: 7499
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- CNC Control System Serial Number: none
- Location: Mesa, AZ
Re: Haas VF-1 1994 Retrofit Allin1DC - Progress update
Plow on!
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
manni
- Posts: 15
- Joined: Sun Jan 24, 2021 2:58 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: none
- Location: Walsall - UK
- Contact:
Re: Haas VF-1 1994 Retrofit Allin1DC - Progress update
Hi,
My this week progress. didn't get much time on this, finally at the stage of power up. Still have few more checks.
will take more image of last 2 days work over the weekend.
The estop turned out too small so I have swapped it to the normal size.
Tried my best to keep wiring tidy as best as I can.
any mistakes you guys spot let me know.
Thanks
Manni
My this week progress. didn't get much time on this, finally at the stage of power up. Still have few more checks.
will take more image of last 2 days work over the weekend.
The estop turned out too small so I have swapped it to the normal size.
Tried my best to keep wiring tidy as best as I can.
any mistakes you guys spot let me know.
Thanks
Manni
- Attachments
-
-
-
-
-
-
-
-
-
-