Omnitec Selex Pal retrofit
Moderator: cnckeith
-
- Posts: 156
- Joined: Thu Jul 09, 2020 9:50 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Omnitec Selex Pal retrofit
It has an in/out Neutral. Also they have an earthground which has a terminal soldered to casing.
-
- Posts: 399
- Joined: Thu Dec 03, 2020 4:54 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Omnitec Selex Pal retrofit
I cant find any information to say that you would need to connect it. As long as you are not using a neutral and all current is returning through the three phase wires, just leave the neutral terminals open. Definitely dont short them together. You could earth one end of them but I really dont see that gaining much.
-
- Posts: 156
- Joined: Thu Jul 09, 2020 9:50 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Omnitec Selex Pal retrofit
Couple more updates, I have the DMM servo drives all wired up, next up wire in MPG pendant (10 switches, one mpg dial, resolution dials.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Omnitec Selex Pal retrofit
Do you have a properly sized line reactor feeding the DYN4 drives in there some where
I see 3 encoder cables hooked up. What are those for? Hand wheels?
Nice clean work!
I see 3 encoder cables hooked up. What are those for? Hand wheels?
Nice clean work!
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 156
- Joined: Thu Jul 09, 2020 9:50 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Omnitec Selex Pal retrofit
Yes, those are the single phase for control voltage, the large 16am 3phase are on the other side. Those 3 cables are for the 1616 expander boards. Total of 90 I/O
-
- Posts: 156
- Joined: Thu Jul 09, 2020 9:50 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Omnitec Selex Pal retrofit
I just reread your post, Line reactor is on order!
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Omnitec Selex Pal retrofit
Sorry. I didn't zoom in and mistook the IO expansion pirate for encoder connectors.
Marty
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 399
- Joined: Thu Dec 03, 2020 4:54 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Omnitec Selex Pal retrofit
Nice work! I like the way you have stacked the ADD1616s. I am not really a fan of how they mount on top of the Oak myself! What is the PCB tucked away under the servo drives? 90 IO is quite a lot is it mostly related to the tool changers?
-
- Posts: 156
- Joined: Thu Jul 09, 2020 9:50 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Omnitec Selex Pal retrofit
There is an 8 tool rotary, plus a 9 vdrill block, with solenoids to push drill down and engage. Also have 10 buttons with lighted feedback. Relay cards behind the drives.
-
- Posts: 156
- Joined: Thu Jul 09, 2020 9:50 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Omnitec Selex Pal retrofit
Update, Centroid Oak conversion is in final assembly, after bench testing complete system (control panel on table)