I purchased the 100.00 version of Intercon back in April of 2019 and had not used it much until the last few days. My version is Mill v4.14.
I find it very hard to build a part using it, because, unlike the version that's on my mill in the shop, this version does not show the graphic on the left side of the screen indicating the various points and dimensions as you enter the needed information. In other words, I have no way to know where my first hole in a drill array is, or where the points of an arc are located.
Anyone know what I'm missing?
Trouble using Intercon
Moderator: cnckeith
-
- Posts: 4
- Joined: Wed Dec 26, 2018 4:27 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A900695
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Vestal, NY 13850
-
- Posts: 3072
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Trouble using Intercon
Have you tried pressing "F5 Help" when entering the data?
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 4
- Joined: Wed Dec 26, 2018 4:27 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A900695
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Vestal, NY 13850
Re: Trouble using Intercon
AhHa....That's the ticket. I got it now! Thanks for the help Tom.