Hello Guys
In random tool change In centroid during running is there any parameter on screen that shows the Next tool NX.T ?
Like fanuc there is two variable
1) HD.T (Tool in spindle)
2) NX.T (Next tool is tool on the BIn)
Attached is the pic of fanuc show the two variable
Thanks
ARM type Tool changer , Head Tool HD.T and Next Tool NX.T
Moderator: cnckeith
Re: ARM type Tool changer , Head Tool HD.T and Next Tool NX.T
I don't believe so.
For testing and troubleshooting, you can use the Alt-i display to look at whatever variable the PLC program uses to store the most recent M107 tool number. For example, in my oak-unified.src programs, this is W27. You could move definitions around to put it on one of W1-W10 so that it is on the first page of the Alt-i display.
For testing and troubleshooting, you can use the Alt-i display to look at whatever variable the PLC program uses to store the most recent M107 tool number. For example, in my oak-unified.src programs, this is W27. You could move definitions around to put it on one of W1-W10 so that it is on the first page of the Alt-i display.
-
- Posts: 98
- Joined: Fri Jun 10, 2011 8:31 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: ARM type Tool changer , Head Tool HD.T and Next Tool NX.T
As a operator prospective those information are Crucial and must on front page .
Hope centroid will put those on front
Hope centroid will put those on front
-
- Posts: 3094
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: ARM type Tool changer , Head Tool HD.T and Next Tool NX.T
Tool in spindle and the current offset are on the main screen already. Does your process sheet not tell what the next tool is?
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.