M39 Bridgeport Mill Will Not Home/All Axis Only Move Negative
Moderator: cnckeith
-
- Posts: 15
- Joined: Tue Jan 30, 2018 10:53 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 3276
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: Yes
Re: M39 Bridgeport Mill Will Not Home/All Axis Only Move Negative
Rechecked
Purple 12v
Orange -11.9v
Red 5.1v
Purple 12v
Orange -11.9v
Red 5.1v
-
- Posts: 9912
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: M39 Bridgeport Mill Will Not Home/All Axis Only Move Negative
Sounds let me DC3IO needs to be sent in for repair.
Let's see if Marc concurs.
Let's see if Marc concurs.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 15
- Joined: Tue Jan 30, 2018 10:53 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 3276
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: Yes
Re: M39 Bridgeport Mill Will Not Home/All Axis Only Move Negative
I have no idea, saying I'm a rookie is a understatement
-
- Posts: 9912
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: M39 Bridgeport Mill Will Not Home/All Axis Only Move Negative
I meant Marc Leonard (cncsnw)
The full power without motion is the control is trying to drive the motor and sees no movement from the encoder. Which makes sense if that direction is dead.
Don't quote me on this but I believe Centroid will repair that particular problem for $350. You would have to call them to confirm. The have to look over the unit to give you an accurate estimate.
Your other alternative is to uprade to the All in One DC board. You can trade in your existing motion control board in order to transfer your software unlocks to the All in One DC. You would have to discuss that with Centroid.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 15
- Joined: Tue Jan 30, 2018 10:53 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 3276
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: Yes
Re: M39 Bridgeport Mill Will Not Home/All Axis Only Move Negative
I was guessing their was another Marc, wonder if their is a Marc discount?
-
- Posts: 9912
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: M39 Bridgeport Mill Will Not Home/All Axis Only Move Negative
You may call Centroid for advice on this.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 15
- Joined: Tue Jan 30, 2018 10:53 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 3276
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: Yes
Re: M39 Bridgeport Mill Will Not Home/All Axis Only Move Negative
Ok I just ordered the All in One DC board. When I get going on this should I start a new thread for updates and questions?
Re: M39 Bridgeport Mill Will Not Home/All Axis Only Move Negative
Yes, since the subject line of this thread has nothing to do with installing an Allin1DC as an upgrade to an early SERVO1 M39, you should start a new thread with a new and apropos subject line.
-
- Posts: 9912
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: M39 Bridgeport Mill Will Not Home/All Axis Only Move Negative
You can start a new thread. Just post a link to your Google photo album.
I trust you called Centroid and worked out the software exchange for your old motion controller?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ