Hi Folks, Happy new year
My issue is;
"C:\Users\steph\Desktop\Extron Upgrades\cncm\compile.cmd" "Centroid-Mill-Standard-OAK-ATC-Umbrella-Aly-Tek-r5.src"
Process started (PID=24892) >>>
C:\Program Files\Notepad++>cd \cncm
C:\cncm>mpucomp.exe "Centroid-Mill-Standard-OAK-ATC-Umbrella-Aly-Tek-r5.src" mpu.plc
'mpucomp.exe' is not recognized as an internal or external command,
operable program or batch file.
C:\cncm>pause
I've uninstalled Notepad++ and reinstalled it and I get the same response I've searched in here for answers I've re-read and watched the Youtube Video numerous times and I'm lost
Please help,
TIA
Stephen
Notepad ++ Compile issue (Resolved)
Moderator: cnckeith
-
- Posts: 16
- Joined: Mon Nov 02, 2020 7:56 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A900869
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Brisbane, Australia
- Contact:
Notepad ++ Compile issue (Resolved)
Many Thanks
Stephen @ Aly-Tek
Stephen @ Aly-Tek
-
- Posts: 3096
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Notepad ++ Compile issue
Was that a Cmd prompt or a PowerShell prompt? If PowerShell, try using .\mpucomp.exe You can also try the full path to mpucomp and see if that works.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 16
- Joined: Mon Nov 02, 2020 7:56 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A900869
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Brisbane, Australia
- Contact:
Re: Notepad ++ Compile issue
I'm sorry Tom i've no idea what you are talking about All I can say is I press F6 and that's what I get. I followed the Notepad++ Install And TB to the letter. I've checked all the position and symbols in all the areas more than twice. I've doubled checked the zip files for compiling and still nothing
Now it seems I can't even skip this step and load it to trial it as the PLC Installer won't even find the file
Many Thanks
Stephen @ Aly-Tek
Stephen @ Aly-Tek
-
- Posts: 368
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
Re: Notepad ++ Compile issue
Suggest you check your C:\cncm folder and see if it actually contains the file called mpucomp.exe as your message could indicate it's missing. If it is missing, you will need to find the location where it is and then as Tom says, you can add its path to your command.
Hope this helps
Hope this helps
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"
-
- Posts: 3096
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Notepad ++ Compile issue
This message in your output;
indicates that Windows could not find the file mpucomp.exe. As Nigelo says, first confirm that the file exists in the C:\CNCM directory. If not, then you need to locate the file and copy it there. After doing this, if you still get the same error message, try adding a ".\" (without the quotes) in front of the filename in your compile.cmd file like this: .\mpucomp.exe %1 mpu.plc
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 22
- Joined: Mon Jan 18, 2021 6:19 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: 0008DC111213-1202201060
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Notepad ++ Compile issue
Hello everyone.
I also have some notepad++ compile issue.
anyone have an ide what is wrong? done all in the tech bulletins 294 and seen the video from centroid on youtube but still cant get past this point.
"C:\cncm\compile.cmd" "Centroid-Mill-Standard-OAK-RotaryClamp-r1.src"
; about to start a child process: ""C:\cncm\compile.cmd" "Centroid-Mill-Standard-OAK-RotaryClamp-r1.src""
CreateProcess() failed with error code 2:
The system cannot find the specified file.
================ READY ================
I also have some notepad++ compile issue.
anyone have an ide what is wrong? done all in the tech bulletins 294 and seen the video from centroid on youtube but still cant get past this point.
"C:\cncm\compile.cmd" "Centroid-Mill-Standard-OAK-RotaryClamp-r1.src"
; about to start a child process: ""C:\cncm\compile.cmd" "Centroid-Mill-Standard-OAK-RotaryClamp-r1.src""
CreateProcess() failed with error code 2:
The system cannot find the specified file.
================ READY ================
-
- Posts: 3096
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Notepad ++ Compile issue
I would guess it cannot find c:\cncm\compile.cmd. Is it in the cncm directory?
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 22
- Joined: Mon Jan 18, 2021 6:19 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: 0008DC111213-1202201060
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Notepad ++ Compile issue
yes it is but it was a hidden txt extension on it "compile.cmd.txt" . got it working now. Thanks
Re: Notepad ++ Compile issue
See viewtopic.php?f=64&t=4196&p=33895#p33895 to learn how to configure Windows so that it shows you the full name of each file, instead of hiding extensions.
-
- Posts: 12
- Joined: Wed Feb 24, 2021 11:35 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Notepad ++ Compile issue
Hello all,
Followed tech bulletin and Centroid CNC Technical Support video and all good
up to the compile command. Here is the error:
"C:\cncm\compile.cmd""acorn_mill_plc.src"
Process started (PID=9428) >>>
'"C:\cncm\compile.cmd""acorn_mill_plc.src"' is not recognized as an internal or external command,
operable program or batch file.
<<< Process finished (PID=9428). (Exit code 1)
================ READY ================
Files seem to be in the right directories. Not sure what to fix.
Any help would be appreciated!
Followed tech bulletin and Centroid CNC Technical Support video and all good
up to the compile command. Here is the error:
"C:\cncm\compile.cmd""acorn_mill_plc.src"
Process started (PID=9428) >>>
'"C:\cncm\compile.cmd""acorn_mill_plc.src"' is not recognized as an internal or external command,
operable program or batch file.
<<< Process finished (PID=9428). (Exit code 1)
================ READY ================
Files seem to be in the right directories. Not sure what to fix.
Any help would be appreciated!