I have a Ajax DM45 that I am installing the DC-1 to. I purchased the cable that Ajax uses with their 4th axis rotary table. Does someone have the pinout specifications for that connector?
John
**Resolved** Connector pinout
Moderator: cnckeith
-
- Posts: 433
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Connector pinout
The attached schematic has a pin-out of the cable (section A4).
- Attachments
-
- S11003_110VAC_ALLIN1DC_Mill_w_4th_Optional.pdf
- (115.6 KiB) Downloaded 252 times
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 70
- Joined: Mon Jul 09, 2012 5:09 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 929110276
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
Re: Connector pinout
Excellent, exactly what I needed.
Thanks,
John
Thanks,
John