Desk top Computer Bios Settings

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

promisemachining
Posts: 60
Joined: Thu Nov 17, 2016 2:59 pm
Allin1DC CNC Controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: Yes
CNC Control System Serial Number: 0327060180

Re: Desk top Computer Bios Settings

Post by promisemachining »

Sir,
I have purchased a GA-M61SME-S2 motherboard. I should have it later in the week. Hopefully this will allow me to get the USB's working.
Thank you for your help!!!
I will check in and let you know if I got it fixed.
cncsnw
Posts: 1605
Joined: Wed Mar 24, 2010 5:48 pm

Re: Desk top Computer Bios Settings

Post by cncsnw »

You might yet need to update to version 2.72 (or at least, any version newer than 2.60) and perhaps switch to a compact flash adapter that supports DMA (e.g. Fabiatech FB4617 v2.2, or Addonics ADIDECFB).

I don't recall whether Centroid transitioned to the GA-M61 motherboards before or after they introduced version 2.60, which has an updated Linux kernel.
Post Reply