Sir,
I have purchased a GA-M61SME-S2 motherboard. I should have it later in the week. Hopefully this will allow me to get the USB's working.
Thank you for your help!!!
I will check in and let you know if I got it fixed.
Desk top Computer Bios Settings
Moderator: cnckeith
-
- Posts: 79
- Joined: Thu Nov 17, 2016 2:59 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0327060180, T39 A90089, M-39s 3535, M-39s 3770, M400ac/inv, M400ac/atc 10388
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: Yes
Re: Desk top Computer Bios Settings
You might yet need to update to version 2.72 (or at least, any version newer than 2.60) and perhaps switch to a compact flash adapter that supports DMA (e.g. Fabiatech FB4617 v2.2, or Addonics ADIDECFB).
I don't recall whether Centroid transitioned to the GA-M61 motherboards before or after they introduced version 2.60, which has an updated Linux kernel.
I don't recall whether Centroid transitioned to the GA-M61 motherboards before or after they introduced version 2.60, which has an updated Linux kernel.