help with setting up notepad++ for plc compiling

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
tradin1
Posts: 2
Joined: Fri Nov 06, 2020 2:56 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

help with setting up notepad++ for plc compiling

Post by tradin1 »

hello everyone. i just upgraded my m15 to a new allin1 dc. i do not have my serial number from under the cover but do not think it is relevant to this question.

i am trying to set up my notepad++ per the tech bulletin and the associated youtube video from centroid.

i have followed every step to the T.

i unzipped the documents to my cncm folder.

i changed the compile.mill.txt to compile.cmd

and when i try to execute the compile.cmd and it says file not found.

do i need to point notepad++ to my cncm folder? if so, how do i do that?

thx
Attachments
image0.jpeg
AcornJosh
Posts: 48
Joined: Tue Apr 17, 2018 8:58 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: help with setting up notepad++ for plc compiling

Post by AcornJosh »

You need to open a PLC file from the cncm directory.
When requesting support READ THIS POST first. viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
tradin1
Posts: 2
Joined: Fri Nov 06, 2020 2:56 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: help with setting up notepad++ for plc compiling

Post by tradin1 »

can you point me to the instructions on how to do that in notepad++? as you can see in the picture i had the instructions open and was following them. i do not know how to select a directory in notepad++. i just did what was on the instructions and never saw an option to select a certain directory.
AcornJosh
Posts: 48
Joined: Tue Apr 17, 2018 8:58 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: help with setting up notepad++ for plc compiling

Post by AcornJosh »

Place the PLC program in the CNCM directory, open with notepad++

Here is more information:
https://www.youtube.com/watch?v=7WiEJiQ ... i2WKIedQlQ
When requesting support READ THIS POST first. viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply