Hey Marty,
I really didn't have a big problem getting the servo going, but once I did, I changed my mind. I felt that I would be under utilizing the DMM servo. So I bought a motor from your Italian stallion company TVT America. Looks good, but time will tell.
John
Axis jogging wrong
Moderator: cnckeith
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Axis jogging wrong
Keep us posted....jcsb wrote: ↑Sat Oct 31, 2020 9:49 pm Hey Marty,
I really didn't have a big problem getting the servo going, but once I did, I changed my mind. I felt that I would be under utilizing the DMM servo. So I bought a motor from your Italian stallion company TVT America. Looks good, but time will tell.
John
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ