CNC12 for Oak,Allin1DC, MPU11 v4.16 has been released.

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
cnckeith
Posts: 2933
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

CNC12 for Oak,Allin1DC, MPU11 v4.16 has been released.

Post by cnckeith »

CNC12 for Oak,Allin1DC, MPU11 v4.16 has been released.

https://www.centroidcnc.com/centroid_di ... loads.html

New pricing structure for Oak and ALlin1DC has been released.
Refresh your browser and clear cache to see changes.

https://www.centroidcnc.com/centroid_di ... oller.html

https://www.centroidcnc.com/centroid_di ... oller.html
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
cnckeith
Posts: 2933
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: CNC12 for Oak,Allin1DC, MPU11 v4.16 has been released.

Post by cnckeith »

cnckeith wrote: Wed Oct 07, 2020 11:14 am CNC12 for Oak,Allin1DC, MPU11 v4.16 has been released.

https://www.centroidcnc.com/centroid_di ... loads.html

New pricing structure for Oak and ALlin1DC has been released.
Refresh your browser and clear cache to see changes.

https://www.centroidcnc.com/centroid_di ... oller.html

https://www.centroidcnc.com/centroid_di ... oller.html
To purchase a license file for an existing system (not a new hardware order), go online purchase the update
https://www.centroidcnc.com/centroid_di ... loads.html

($99 or $299 depending on how old the system is, see https://www.centroidcnc.com/centroid_di ... lained.pdf for details.

you will get an email receipt from paypal forward that receipt to diysales@centroidcnc.com along with a fresh v4.16 report.zip and the license file will be emailed to you.
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Aplus
Posts: 24
Joined: Wed Mar 20, 2019 2:15 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: A900730

Re: CNC12 for Oak,Allin1DC, MPU11 v4.16 has been released.

Post by Aplus »

So I purchased and downloaded V4.16 and I am getting this message when trying to install. Error opening file for writing. What am I doing wrong? How do I move on?
IMG_7223.jpg
cnckeith
Posts: 2933
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: CNC12 for Oak,Allin1DC, MPU11 v4.16 has been released.

Post by cnckeith »

hi, you are getting that error since you are running the v4.16 installer while CNC12 is running.
shut down cnc12 and vcp, then run the v4.16 installer
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Nigelo
Posts: 62
Joined: Tue Dec 11, 2018 4:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: F045DA80C8B8-0905181172
Location: UK

Re: CNC12 for Oak,Allin1DC, MPU11 v4.16 has been released.

Post by Nigelo »

Has the Demo version for using Offline Intercon also changed from v4.14 to v4.16?

TIA
Post Reply