When upgraded from CNC11 to CNC12, no power to servos

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
martyscncgarage
Posts: 9914
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: When upgraded from CNC11 to CNC12, no power to servos

Post by martyscncgarage »

Can you put a fan on the end of the motor that runs to keep it cool? Just a thought.
Wired MPGs from Centroid are not terribly expensive and they make a bulkhead cable. Down the road...

Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Top
Post Reply

Return to “Centroid Oak, Allin1DC, MPU11 and Legacy products”