Hello Everyone,
I was finally able to sit down and start the bench test process, Allin1Dc all wired up, downloaded the Centroid CNC 12 software and PLC program, I uploaded the Allin1DC_Centroid_Standard default program. Got to Chapter 4 to the 'Unlock Demo Code' screen with my Software unlock Sheet in front of me, it looks like I have CNC7 and CNC10 demo locking codes, nothing about CNC12, in which I downloaded. Do I have to download CNC10 or 11 first and then run the upgrade? Not sure on where to go from this point?
Thanks,
Mark
Bench Test Allin1DC
Moderator: cnckeith
-
- Posts: 27
- Joined: Thu Mar 12, 2020 6:45 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
Re: Bench Test Allin1DC
Enter the code(s) you received. CNC12 uses the same codes as CNC7 (v5.23 and later); CNC10; and CNC11.
-
- Posts: 27
- Joined: Thu Mar 12, 2020 6:45 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
Re: Bench Test Allin1DC
cncsnw,
Thanks, instructions were a little unclear. Moving forward now. Does anyone know a quick way to toggle between the LAN connector to the ALLin1DC and the Internet? I was trying to create an additional LAN icon in my network connection under setting, then I can go into and just make a quick choice. How is everyone else doing this?
Thanks,
Mark
Thanks, instructions were a little unclear. Moving forward now. Does anyone know a quick way to toggle between the LAN connector to the ALLin1DC and the Internet? I was trying to create an additional LAN icon in my network connection under setting, then I can go into and just make a quick choice. How is everyone else doing this?
Thanks,
Mark
-
- Posts: 27
- Joined: Thu Mar 12, 2020 6:45 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
Re: Bench Test Allin1DC
Got it figured out.
Thanks,
Mark
Thanks,
Mark
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Bench Test Allin1DC
Once CNC12 makes the CNC PC I.P. address static, it's used for one thing, communicating to All in One DC. Add another network card if you want a second Ethernet port or use a USB wifi adapter.Reeltime273 wrote: ↑Sat Jul 18, 2020 7:44 am cncsnw,
Thanks, instructions were a little unclear. Moving forward now. Does anyone know a quick way to toggle between the LAN connector to the ALLin1DC and the Internet? I was trying to create an additional LAN icon in my network connection under setting, then I can go into and just make a quick choice. How is everyone else doing this?
Thanks,
Mark
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ