If the control sees a detect signal it will put safety features in place.
Pictures of your application would help. Just guessing.
You really need to hook the probes up in a conventional manner to the All in One DC.
You have what you need
Workflow for ER collet spindle when touching off each tool change manually
Moderator: cnckeith
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Workflow for ER collet spindle when touching off each tool change manually
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ