Allin1DC Bench test
Moderator: cnckeith
-
- Posts: 45
- Joined: Tue Jun 30, 2020 3:18 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0324202376
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Allin1DC Bench test
Hi i`ve just received my allin1DC and doing the bench test i`ve got to the spindle test voltage and there does`nt seem to be any power coming from it.
the 2 lights are on behind the plug have i missed something or will there be a fault on the board.
Cheers
the 2 lights are on behind the plug have i missed something or will there be a fault on the board.
Cheers
-
- Posts: 3102
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Allin1DC Bench test
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 45
- Joined: Tue Jun 30, 2020 3:18 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0324202376
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Allin1DC Bench test
Hi here`s a Report zip and some pics of my setup so far i also did`nt receive the unlock codes from the supplyer in france where i got it from and when i spoke to him he said he was waiting for them from Centroid but it says they are shipped with the whole thing.-
- Posts: 3102
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Allin1DC Bench test
Google gives a 404 error on the photos. If we could see what you see it would help greatly. You mention two lights on behind the plug. What plug? There should be NINE leds next to the limit switch override switches. Which ones of those are lit? What number is displayed? Does it have a decimal point lit? How is the wiring connected?
It's very hard to provide help when the only info we're given is "it doesn't work".
You should have received a demo unlock code with the AllIn1DC. Centroid will send the permanent unlocks after they have recieved payment from your dealer.
It's very hard to provide help when the only info we're given is "it doesn't work".
You should have received a demo unlock code with the AllIn1DC. Centroid will send the permanent unlocks after they have recieved payment from your dealer.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 45
- Joined: Tue Jun 30, 2020 3:18 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0324202376
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Allin1DC Bench test
I`ve resent like this if there`s still a problem with pics i`ll take some screen shots.
I`ve also tried it with the led number 4 showing also.
I`ve also tried it with the led number 4 showing also.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Allin1DC Bench test
There is a sheet with the unlock codes shipped with the All in One DC. Double check the paperwork you got with it. If its not there, take it up with the supplier of the All in One DC.Gixer wrote: ↑Thu Jul 02, 2020 3:47 am report_0324202376_2020-07-02_08-06-54.zipHi here`s a Report zip and some pics of my setup so far i also did`nt receive the unlock codes from the supplyer in france where i got it from and when i spoke to him he said he was waiting for them from Centroid but it says they are shipped with the whole thing.
https://photos.google.com/share/AF1QipM ... WMkkARFrOA
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Allin1DC Bench test
You have faults, you will not be able to complete the tests with them.
Go back to the All in One DC Installation manual and start over and follow page/instruction EXACTLY
Go back to the All in One DC Installation manual and start over and follow page/instruction EXACTLY
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 3102
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Allin1DC Bench test
In your screenshot, right in the middle, it says "spindle fault". The spindle outputs will not have voltage on them when the spindle is in a faulted state. Correct the spindle fault before proceeding. If you follow the instructions, step by step as Marty suggests, it will work.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 45
- Joined: Tue Jun 30, 2020 3:18 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0324202376
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Allin1DC Bench test
I`ve started the install again with the manual and Martys video and i can`t get rid of the spindle fault i`ll keep trying
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Allin1DC Bench test
You don't have a VFD wired up to ALL in ONE DC do you?
You disable it when you invert the inputs as directed.
Please post a screen shot of the diagnostic screen
(ALT+i)
When you installed a PLC you installed the BASIC PLC correct?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ