Allin1DC Bench test

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Gixer
Posts: 45
Joined: Tue Jun 30, 2020 3:18 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0324202376
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Allin1DC Bench test

Post by Gixer »

I don`t have a VFD wired.
i`ve re installed everthing and got rid of the fault codes but still no power and now it says my Demo has run out so i`ve been on to my supply where i got it from to get my unlock codes.
i will send a diagnostic screen when i get this unlock code.
Yes i installed the Basic PLC
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Allin1DC Bench test

Post by tblough »

Gixer - can you take a screen shot of the I/O screen so we can see how you have your inputs configured and what is on and off?
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Allin1DC Bench test

Post by martyscncgarage »

Gixer wrote: Fri Jul 03, 2020 2:56 am I don`t have a VFD wired.
i`ve re installed everthing and got rid of the fault codes but still no power and now it says my Demo has run out so i`ve been on to my supply where i got it from to get my unlock codes.
i will send a diagnostic screen when i get this unlock code.
Yes i installed the Basic PLC
Who did you buy it from? Are you in the US? You could have bought it directly from Centroid. As previously mentioned, when you buy All in One retail, you get the basic software unlocks printed on a sheet.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Gixer
Posts: 45
Joined: Tue Jun 30, 2020 3:18 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0324202376
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Allin1DC Bench test

Post by Gixer »

I`ll have to send screen shots after weekend as i`m away i`m in the uk but bought it from a dealer in France as there are none in the uk.
I`ve asked him for the unlock codes today and he says i won`t receive them until the middle of next week which i find very strange.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Allin1DC Bench test

Post by martyscncgarage »

Gixer wrote: Fri Jul 03, 2020 3:10 pm I`ll have to send screen shots after weekend as i`m away i`m in the uk but bought it from a dealer in France as there are none in the uk.
I`ve asked him for the unlock codes today and he says i won`t receive them until the middle of next week which i find very strange.
Quite strange. How much did you pay for it?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Gixer
Posts: 45
Joined: Tue Jun 30, 2020 3:18 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0324202376
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Allin1DC Bench test

Post by Gixer »

I`ve started from the beginning again and i get to the first voltage check and all i get is 0.02 and i`ve sent some screen shots.
The reason he said i`ve not got the unlock codes is because he only pays Centroid on the 10th of the month.
If you need anymore info just let me know.
Job Screen.gif
I.O Screen.gif
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Allin1DC Bench test

Post by martyscncgarage »

I would like to know WHO the dealer is?
How much did you pay for the All in One DC?
Honesty helps here.....

Did he not generate a demo code for you?
Please post an updated report F7 utilities F7 create report.

I am not for certain, but it might be possible you can't setup the control without at least a DEMO code if not the unlocks.
If you bought this All in One Legitimately, from a legitimate dealer, the price COMES with the basic software unlock.
Something is not right here.....

Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Gixer
Posts: 45
Joined: Tue Jun 30, 2020 3:18 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0324202376
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Allin1DC Bench test

Post by Gixer »

report_0324202376_2020-07-02_08-06-54 (1).zip
(214.78 KiB) Downloaded 149 times
The Dealer is
DEMI Diffusioon Equipements Measure ingenierie.
3800 euro`s.
i have a Demo code now
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Allin1DC Bench test

Post by martyscncgarage »

With demo code successfully loaded you should be able to test.

Your dealer in my opinion did you a disservice by not sending the unlocks with All in One DC when you paid for it in full
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Gixer
Posts: 45
Joined: Tue Jun 30, 2020 3:18 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0324202376
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Allin1DC Bench test

Post by Gixer »

I can`t get the voltage readings as in my previouse message 3 up all i can do is wait till the 10th for my per unlock codes.but i need to get this issue sorted first
Post Reply