CNC Ajax Easimill 3
Moderator: cnckeith
-
- Posts: 1
- Joined: Wed Sep 07, 2011 11:03 am
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
CNC Ajax Easimill 3
I have found used the CNC Ajax Easimill 3. Cant I use it directly with solidwork-solidcam or I need to change-ad something to communicate the cam with the machine. On the back of the panel there is e plug that looks like the plug on the ide hard drives
-
- Posts: 286
- Joined: Thu Mar 18, 2010 2:24 pm
Re: CNC Ajax Easimill 3
Drimaropoylos,
This is not one of our controls we are AjaxCNC not Ajax. Looking at the pictures I would say you are not going to be able to use that setup directly with a CADCAM package.
I would recommend replacing the control with an Allin1DC package.
This is not one of our controls we are AjaxCNC not Ajax. Looking at the pictures I would say you are not going to be able to use that setup directly with a CADCAM package.
I would recommend replacing the control with an Allin1DC package.
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..