I want to control a second spindle. Ited be great to have on off from and M code. Speed control from the aux buttons on the Pendent. Does anyone know if this can be done or not.
Thanks Ad
**RESOLVED** Adding second inverter driven spindle
Moderator: cnckeith
-
korellcutshop
- Posts: 1
- Joined: Sat Aug 20, 2011 9:55 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: Yes
-
CNC-Global
- Posts: 56
- Joined: Fri Jun 10, 2011 8:40 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Adding second inverter driven spindle
If you are a Mpu11 user then Dual spindle speed and on/off is possible.Ajax has a ADD4AD4D Expansion Board that can handle additional 5 analog i/o .But you need a custom PLC Program from Ajax
In CNC10 can handle only on/off control not speed But need a cutom plc program for it
CNC Global
In CNC10 can handle only on/off control not speed But need a cutom plc program for it
CNC Global