Hello
I am new in this forum and need your help.
I saw cnc10 and Ajax board, I think it is very fantastic. I want build a mini CNC for my jab.
Please tell me can i run this spindle that i showed in below link with Ajax board?
http://www.alfredjaeger.de/grinding-spi ... 1S5AM.html
this spindle have frequency converter :
http://www.alfredjaeger.de/spindle-tool ... -tool.html
Please help me for know more about the ability of Ajax board and use it.
Thank you
spindle controller
Moderator: cnckeith
-
- Posts: 56
- Joined: Fri Jun 10, 2011 8:40 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: spindle controller
There is no electrical specification of the frequency controller .To interface with the Ajax system we need the connection diagram.
Theoretically Yes ajax system can provide the interface with the frequency controller .If the frequency controller that you mentioned has accept 0-10V ,fwd ,rev signals
CNC-Global
Theoretically Yes ajax system can provide the interface with the frequency controller .If the frequency controller that you mentioned has accept 0-10V ,fwd ,rev signals
CNC-Global
-
- Posts: 9
- Joined: Wed Aug 10, 2011 1:58 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: spindle controller
Hi CNC Global
Thank you for your reply
here is specification of driver of my spindle :
http://i813.photobucket.com/albums/zz57 ... tled-8.jpg
Thank you
Thank you for your reply
here is specification of driver of my spindle :
http://i813.photobucket.com/albums/zz57 ... tled-8.jpg
Thank you
-
- Posts: 56
- Joined: Fri Jun 10, 2011 8:40 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: spindle controller
sml2011,
Yes from the marked control input alalog and digital i am quite confident that this drive is compatible . But i need a descriptive manual specially the details of 6 digital inputs to pinpoint or give you a comrehensive shematic of the ajax control to your frequency inverter
CNC-global
Yes from the marked control input alalog and digital i am quite confident that this drive is compatible . But i need a descriptive manual specially the details of 6 digital inputs to pinpoint or give you a comrehensive shematic of the ajax control to your frequency inverter
CNC-global