DORIAN CNC20 TOOL CHANGER

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
cnctc
Posts: 17
Joined: Tue Jan 15, 2019 12:59 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 0501192213
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

DORIAN CNC20 TOOL CHANGER

Post by cnctc »

does anybody have any experience/advice on controlling a Dorian CNC20 indexer with an Allin1DC?
cnctc
Posts: 17
Joined: Tue Jan 15, 2019 12:59 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 0501192213
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: DORIAN CNC20 TOOL CHANGER

Post by cnctc »

This is on a milltronics lathe.
If there is any other information needed please ask.

I would appreciate some help please.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: DORIAN CNC20 TOOL CHANGER

Post by martyscncgarage »

Marc may. Will have to wait until he has a chance to read the post.
However, do you clearly understand how the turret operates and can you share that information? What kind of motor? What kind of sensors for positioning? Does it have a brake?
Might you have any documentation on the turret you can post here, or a link to a manual?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
cnctc
Posts: 17
Joined: Tue Jan 15, 2019 12:59 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 0501192213
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: DORIAN CNC20 TOOL CHANGER

Post by cnctc »

Here is the manual.
Attachments
CCF_000108.pdf
(1.03 MiB) Downloaded 86 times
CCF_000107.pdf
(1.21 MiB) Downloaded 74 times
cnctc
Posts: 17
Joined: Tue Jan 15, 2019 12:59 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 0501192213
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: DORIAN CNC20 TOOL CHANGER

Post by cnctc »

the rest
Attachments
CCF_000110.pdf
(720.41 KiB) Downloaded 90 times
CCF_000109.pdf
(1 MiB) Downloaded 98 times
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: DORIAN CNC20 TOOL CHANGER

Post by martyscncgarage »

Thanks for the information.
The turret motor itself is a stepper motor. So, since All in One DC is a servo control, no it appears to me that it can not directly control control it.
However it does appear it has its own control box (SP7XDOR3 BOX). Wich is powered by 115VAC power and contains the stepper driver and the logic inputs to command it. Did you get the box? Can you please take a picture of the indexer complete?
If you have the control box, then it may be possible.
The programming the PLC would be a job for Marc Leonard or Centroid.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: DORIAN CNC20 TOOL CHANGER

Post by cncsnw »

Marty is correct: as long as you have the Dorian control box, then it should be fairly straightforward to integrate with a Centroid control.
Post Reply