Marty's Oak and AC/DC drive setup video running Fanuc servos

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Marty's Oak and AC/DC drive setup video running Fanuc servos

Post by cnckeith »

Marty's Oak and AC/DC drive setup video running Fanuc servos

play list is here. https://www.youtube.com/playlist?list=P ... FVmY7-sxp0

https://youtu.be/Z0w90veXv6w


https://youtu.be/X0XEqGw3AKE


https://youtu.be/Q-V4Iaqakdw
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply