DMM Technology - Coolant splash proof Servo cables

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
CarlEnglish
Posts: 9
Joined: Tue Jul 17, 2018 8:38 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Serial Number
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany
Contact:

DMM Technology - Coolant splash proof Servo cables

Post by CarlEnglish »

Hi, All

Thought i'd share this low cost tip i found for splash proofing cables, while searching for cable conduit today.
I realised a Standard 3/4" garden hose tap fitting works.

Just remove the inner brass from the Hose Fitting, Remove the DMM white plastic insert and rubber grommet.
Install the hose fitting and reinstall the DMM Clamp Fitting without the two clamps and two screws, maybe add a little sealent to be sure, some Black hose and it will look great.

This tip applies to the DMM Technology AC Servos, models 1.0Kw, 1.3Kw, 1,8Kw.
And maybe others out there as well.

Thanks
Carl
Attachments
20190803_024743.jpg
20190803_024728.jpg
Post Reply