Page 1 of 1

my latest CNCPC build for those times when you want speed on the cheap.

Posted: Mon Feb 18, 2019 3:11 pm
by cnckeith
my latest CNCPC build for those times when you want speed on the cheap.

Motherboard
https://www.newegg.com/Product/Product. ... 6813119137

CPU
https://www.newegg.com/Product/Product. ... 6819113481

Ram
https://www.newegg.com/Product/Product. ... 6820231959


You can run a M.2 SSD or a SATA SSD your choice i only used Samsung or Intel SSD's.

128 gb m.2's are around $40

Re: my latest CNCPC build for those times when you want speed on the cheap.

Posted: Mon Feb 18, 2019 7:09 pm
by converterking
Are you more concerned with single thread or multi thread performance? If it is single thread this could be a good choice.
https://www.cdw.com/product/Intel-Penti ... 6107704282!

Re: my latest CNCPC build for those times when you want speed on the cheap.

Posted: Tue Feb 19, 2019 7:30 pm
by tpetricek
Steal of a deal for a short time. i3-8100, 8gb RAM, 1TB HDD and Win 10. Full tower for $299!

https://www.newegg.com/Product/Product. ... gnorebbr=1

Re: my latest CNCPC build for those times when you want speed on the cheap.

Posted: Wed Feb 20, 2019 5:06 pm
by AcornJosh
I actually have a Ryzen 2200G in my personal computer. For the money, its one of the best processors around. The built in Vega graphics will even handle modern games at medium settings and modest resolution.

Re: my latest CNCPC build for those times when you want speed on the cheap.

Posted: Wed Feb 20, 2019 6:31 pm
by cnckeith
cnc12 running smoothing with short vector 3D gcode likes the highest single core thread benchmark you can afford.