Swing arm ATC
Moderator: cnckeith
-
- Posts: 31
- Joined: Sun Feb 18, 2018 7:47 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A900998
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Mackay, Australia
Re: Swing arm ATC
Thank guys. Thanks for everything, I really do appreciate. I know I'm being a pain the backside right now, so I do appreciate your patience. for people that do this kind of thing all the time, I must be annoying as hell.
If the green light ain't burning, you ain't earning.
Jason A.K.A. CrossfireX
Jason A.K.A. CrossfireX
-
- Posts: 135
- Joined: Wed Jul 31, 2019 12:53 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Swing arm ATC
Hello CrossfireX,
Attached is the Centroid Swingarm PLC for our OAK control board. As cncnw mentioned, the PLC has an comment section explaining the arm, inputs and steps the ATC does. (Most if not all Centroid swingarm PLCs have said comment).
To Install, Extract the contents of the attached .zip directly into your C:\cncm folder and overwrite files. Powercycle your machine after doing so. You will need to set Parameters 6, 160, and 161 according to the type of ATC you have and # of Bins you have.
Let me know of any issues with the PLC.
Attached is the Centroid Swingarm PLC for our OAK control board. As cncnw mentioned, the PLC has an comment section explaining the arm, inputs and steps the ATC does. (Most if not all Centroid swingarm PLCs have said comment).
To Install, Extract the contents of the attached .zip directly into your C:\cncm folder and overwrite files. Powercycle your machine after doing so. You will need to set Parameters 6, 160, and 161 according to the type of ATC you have and # of Bins you have.
Let me know of any issues with the PLC.
- Attachments
-
- S15077.pdf
- (586.46 KiB) Downloaded 140 times
-
- Oak-Swingarm-PLC.zip
- (135.47 KiB) Downloaded 103 times
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
-
- Posts: 31
- Joined: Sun Feb 18, 2018 7:47 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A900998
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Mackay, Australia
Re: Swing arm ATC
Thank you so much, You're a life saver... I'll let you know how I go.
If the green light ain't burning, you ain't earning.
Jason A.K.A. CrossfireX
Jason A.K.A. CrossfireX
-
- Posts: 21
- Joined: Thu Apr 30, 2020 11:47 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: ACORN-375
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
Re: Swing arm ATC
Hello, I am using this diagram and plc program for a hurco vmx24. My arm is pneumatic. I need help with programming the tool change. I attach the original diagram of the milling machine.
- Attachments
-
- 0032022007.pdf
- (1.52 MiB) Downloaded 5 times