**RESOLVED** Sample Electrical Enclosure pictures

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Locked
PCM
Posts: 26
Joined: Fri Feb 11, 2011 5:59 pm
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: c19288
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

**RESOLVED** Sample Electrical Enclosure pictures

Post by PCM »

Im trying to figure out how Im going to lay out the components in my enclosure and I thought it might be nice to see pics of other peoples enclosures to get some ideas. Maybe this would be a good place to compile these type of pics. Of course when Im done Ill post a picture of mine. Any input would be greatly appreciated.
Top
Maint_1
Posts: 83
Joined: Sun Sep 19, 2010 3:24 pm
Allin1DC CNC Controller: No
CNC Control System Serial Number: A50391
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: Sample Electrical Enclosure pictures

Post by Maint_1 »

http://www.centroidcnc.com/images/m30_open_250.jpg
Top
diycncscott

Re: Sample Electrical Enclosure pictures

Post by diycncscott »

There are pictures of a suggested layout in the dc3iob installation manual.:

http://www.ajaxcnc.com/tech/downloads/m ... nc11_winxp
Top
Locked

Return to “Centroid Oak, Allin1DC, MPU11 and Legacy products”