motor turn ratio to ball screw

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
owgstrength
Posts: 14
Joined: Sun Oct 14, 2018 10:22 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: A900662
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: Yes

motor turn ratio to ball screw

Post by owgstrength »

Hey guys i found the problem its just to change the motor rev/inch in the software from 5.000 to 2.500
silly me :lol:
Top
Dan M
Posts: 506
Joined: Tue Aug 28, 2018 3:47 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: C8df84dfbdd5-0809181120
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Contact:
Contact Dan M

Re: motor turn ratio to ball screw

Post by Dan M »

owgstrength wrote: ↑Sun Feb 03, 2019 7:23 pm Hey guys i found the problem its just to change the motor rev/inch in the software from 5.000 to 2.500
silly me :lol:
You're welcome lol.
Top
Post Reply

Return to “Centroid Oak, Allin1DC, MPU11 and Legacy products”