I solved the error of the plc, but I have a problem now, my plc led mark to number 3, and it is blinking, I do not know what happens, but I need to solve the problem, moreover, that when I reset the program MACH3, I have problems because it sends an "error", they automatically energizes one of my engines ...
In the instructive I could find the LED Errors Codes but we are in Ecuador, What We can do for this situation?...
Always when we tour on the machine we could find the number 1 in the LED (display). Please if you can aswer me soon that´s great. We need the machine and we are working hard.
we are working now in 127V/60Hz
Thanks.
Pablo.
**RESOLVED** BLINKING 3 IN THE LED
Moderator: cnckeith
Re: BLINKING 3 IN THE LED
Pablo,
The flashing "3" indicates an internal error that must be repaired at the factory.
Please use RMA #26998 and send the drive back to:
AjaxCNC
Attn: Scott
159 Gates Rd
Howard, PA 16841
Please mark the RMA number on the box.
The flashing "3" indicates an internal error that must be repaired at the factory.
Please use RMA #26998 and send the drive back to:
AjaxCNC
Attn: Scott
159 Gates Rd
Howard, PA 16841
Please mark the RMA number on the box.