Oak board with Estun Servo 410/411 errors
Moderator: cnckeith
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Oak board with Estun Servo 410/411 errors <solved>
Bill, thanks for reporting back your solution. K
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 14
- Joined: Sun Oct 14, 2018 10:22 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A900662
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Oak board with Estun Servo 410/411 errors
hey bill i am having some trouble with my estun drives. dont have the cable to configure the drive and i try it manual but still not getting cnc12 to jog the motor i have an ork board too could you help me or anyone who have done the retrofit
Owen
Owen