These are VERY GOOD videos that Keith produced.
Goes over machine start up, Axis motion as well as Tool library setup and part setup, and an example using Intercon:
BED MILL (Applies to routers mostly as well)
https://youtu.be/mA41pUyONJM
KNEE MILL
https://youtu.be/iJcq_G8yRdc
CENTROID CNC Mill Training (Applies to Routers)
Moderator: cnckeith
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
CENTROID CNC Mill Training (Applies to Routers)
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ