Morbidelli U-15 servo motors

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
janne007
Posts: 1
Joined: Wed Oct 27, 2010 11:05 am
Allin1DC CNC Controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Morbidelli U-15 servo motors

Post by janne007 »

Can i use these motors with the kit, changing only the 2000 Line Encoders?

I have '88 morbidelli U-15 point-2-point router,, need a littlebit upgrading, and what is right power source for the motors, in finland we have 230VAC single phase or 380VAC on 3 phase.

Sorry about my bad english.

Best Regards.

Janne

http://www.harman-prt.net/morbidelli/27102010435.jpg Servo1_a

http://www.harman-prt.net/morbidelli/27102010437.jpg Servo1_b

http://www.harman-prt.net/morbidelli/05102009188.jpg Morbidelli U-15
Post Reply