programing axis parameters
Moderator: cnckeith
-
- Posts: 25
- Joined: Thu Sep 23, 2010 9:23 am
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: A900104
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: programing axis parameters
And now its telling me that my demo version has expired. even tho 10 minutes ago i had 9 days left.
-
- Posts: 25
- Joined: Thu Sep 23, 2010 9:23 am
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: A900104
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: programing axis parameters
Hey Scott
I got everything working in the line of communication, but the motors over compensate. they fly back and forth till I get a axis positional error. when i turn the motor by hand it wants to correct it and does to an extent. but when I turn a little too much it starts flying back and forth again and i get another axis positional error.
I got everything working in the line of communication, but the motors over compensate. they fly back and forth till I get a axis positional error. when i turn the motor by hand it wants to correct it and does to an extent. but when I turn a little too much it starts flying back and forth again and i get another axis positional error.
Re: programing axis parameters
Please take a report and send the report.zip file to tech@ajaxcnc.com
Which configuration are you running your drives in -torque or velocity?
Which configuration are you running your drives in -torque or velocity?
-
- Posts: 25
- Joined: Thu Sep 23, 2010 9:23 am
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: A900104
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: programing axis parameters
I'm running them in current mode.