CNC12 for Allin1 DC, still scheduled for release this summer? <released>
Moderator: cnckeith
-
- Posts: 21
- Joined: Sun Mar 11, 2018 4:59 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0130181900
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
CNC12 for Allin1 DC, still scheduled for release this summer? <released>
Hello,
Just wondering if the CNC12 software (for touchscreen use) for the Allin1 DC controller is still scheduled for release this summer. Anyone know?
Thanks
Joe
Just wondering if the CNC12 software (for touchscreen use) for the Allin1 DC controller is still scheduled for release this summer. Anyone know?
Thanks
Joe
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 for Allin1 DC, still scheduled for release this summer?
yes we are working on it! lots to do on the PLC side of things. thanks.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 129
- Joined: Fri Mar 19, 2010 2:38 pm
Re: CNC12 for Allin1 DC, still scheduled for release this summer?
Any updates, two months to go till fall.
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: CNC12 for Allin1 DC, still scheduled for release this summer?
Still on track for a release by the end of summer. Lot's of testing going on right now.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 129
- Joined: Fri Mar 19, 2010 2:38 pm
Re: CNC12 for Allin1 DC, still scheduled for release this summer?
10 days to go, how are things looking?
Last edited by converterking on Wed Sep 12, 2018 7:07 am, edited 1 time in total.
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: CNC12 for Allin1 DC, still scheduled for release this summer?
Hopefully by next week!
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 129
- Joined: Fri Mar 19, 2010 2:38 pm
Re: CNC12 for Allin1 DC, still scheduled for release this summer?
Summer ends: 2018 June 21 - 6:07 AM EDT (10:07 UTC)
I think it ends September 21.
I think it ends September 21.
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: CNC12 for Allin1 DC, still scheduled for release this summer?
Wow, I should read what I copy and paste a bit better...
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 for Allin1 DC, still scheduled for release this summer?
its released.. CNC12 v4.12 software for use with OAK, Red Oak and Allin1DC with VCP and USB MPG support is available for download now on the software download page here. http://www.centroidcnc.com/centroid_diy ... oads.html
i'm populating the website now.. it will take me a few days to update all the graphics and images to reflect that the VCP and Wireless USB MPG are now supported by CNC12 for use with Oak, Red Oak and Allin1DC...so be sure refresh browser to see the latest updates to the pages over the next few days. .
i'm populating the website now.. it will take me a few days to update all the graphics and images to reflect that the VCP and Wireless USB MPG are now supported by CNC12 for use with Oak, Red Oak and Allin1DC...so be sure refresh browser to see the latest updates to the pages over the next few days. .
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 129
- Joined: Fri Mar 19, 2010 2:38 pm
Re: CNC12 for Allin1 DC, still scheduled for release this summer? <released>
If you have a wired control panel and mpg, is there any advantage in updating to cnc12 software?