Problems with Pawn Program <solved>
Moderator: cnckeith
-
Norton
- Posts: 8
- Joined: Thu Apr 05, 2018 9:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: C8FD19C4AB3B-0216180687
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Problems with Pawn Program
Thanks Gary. What your're doing is exactly what I want to do. The only difference is I edited the PAWN file to use T2. So, I only have T2 setup. Did you look at my procedure for setting up T2? I will setup T1 later today and give it a try. Not sure that would make a difference.
-
Gary Campbell
- Posts: 2190
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: Problems with Pawn Program
No I did not. No matter what I thought I saw, your testing it with an aircut would be the best insurance.
-
Norton
- Posts: 8
- Joined: Thu Apr 05, 2018 9:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: C8FD19C4AB3B-0216180687
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Problems with Pawn Program <solved>
FIXED. I uninstalled the software and reinstalled it, setup T01 and all works as expected. I hope this can help someone in the future if they have this problem. What happened with the software I don't know.
I want to thank all who read and contributed to this problem. Hopefully, in the futrue I can contribute to this form in a positive way. Thanks again.
I want to thank all who read and contributed to this problem. Hopefully, in the futrue I can contribute to this form in a positive way. Thanks again.