We've got this system that hasn't been powered up in 6 months, and now the PC won't power up. The mpu11 cards all fire up and the red lights on the control panel keys flash 4 times, but the gigabyte PC doesn't power up.
I've verified that the PC power supply is capable of turning on at the workbench if you jumper the ps-on pin to ground.
Is there some bios setting that controls the CPU power up that may have been lost due to a dead bios battery?
Feels like I'm missing something. This thing always just worked and it has never been on a network so nothing should ever change on it.
Pertinent pics can be found here: https://www.dropbox.com/scl/fo/a2n866g0 ... ngzoy&dl=0
Pete Rondeau
M400 computer won't start <resolved>
Moderator: cnckeith
-
Pete Rondeau
- Posts: 35
- Joined: Thu Oct 03, 2019 12:59 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: South Central Pennsylvania
- Contact:
M400 computer won't start <resolved>
Follow my progress on YouTube
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
Centroid188
- Posts: 40
- Joined: Thu Aug 10, 2017 1:55 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: M400 computer won't start
The BIOS is most likely the issue.
The battery needs replaced and the battery setup.
Centroid has Tech Bulletins on the website that assist in this..
This maybe the one you need:
https://www.centroidcnc.com/dealersuppo ... ds/272.pdf
The battery needs replaced and the battery setup.
Centroid has Tech Bulletins on the website that assist in this..
This maybe the one you need:
https://www.centroidcnc.com/dealersuppo ... ds/272.pdf
1 user liked this post
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
Pete Rondeau
- Posts: 35
- Joined: Thu Oct 03, 2019 12:59 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: South Central Pennsylvania
- Contact:
Re: M400 computer won't start
Thanks! We're back up and running.
Pete
Pete
Follow my progress on YouTube
(Note: Liking will "up vote" a post in the search results helping others find good information faster)