Page 1 of 1
CNC 10 V2.3 can't backup to USB drive
Posted: Mon Apr 15, 2024 7:41 pm
by gary@lawsonhs.com
Can't backup to USB drive. Files on b: USB drive can be viewed but when trying to backup I get drive not found.
Re: CNC 10 V2.3 can't backup to USB drive
Posted: Mon Apr 15, 2024 7:44 pm
by cnckeith
hi, i moved this post into the Legacy forum
Re: CNC 10 V2.3 can't backup to USB drive
Posted: Mon Apr 15, 2024 7:45 pm
by cnckeith
i would try a smaller sized USB stick, the old linux controls could only go up to a certain size stick
Re: CNC 10 V2.3 can't backup to USB drive
Posted: Tue Apr 16, 2024 3:19 pm
by gary@lawsonhs.com
Thanks, I tried a 244 MB USB stick. I can create a new folder on it but, still can't export files to it!
Re: CNC 10 V2.3 can't backup to USB drive
Posted: Tue Apr 16, 2024 4:18 pm
by gary@lawsonhs.com
I also can not open the (Editor F5) from within the program.
Re: CNC 10 V2.3 can't backup to USB drive
Posted: Tue Apr 16, 2024 4:19 pm
by gary@lawsonhs.com
I have the same problem on the Mill and Lathe that are running the same CNC 10