Thank you for the explanation.
Is there anything you do not know about Centroid ?
Uwe
Feature Request - SSV
Moderator: cnckeith
-
tblough
- Posts: 3174
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Feature Request - SSV
If you look at most of the stock Centroid PLC programs, Marc is the one who wrote them!
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
Stephan
- Posts: 75
- Joined: Thu May 12, 2022 2:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Feature Request - SSV
thank you thank you thank you
When I see the result, how good it turned out...it's just great.
I don't want to praise myself but.....it was good to annoy you
As you know, I'm just the operator who needs the parts... and tells you what needs to be improved or should be improved...
Can you please show me/us where to insert your PLC?
Danke Danke Danke Uwe
Du bist der beste
Stephan
When I see the result, how good it turned out...it's just great.
I don't want to praise myself but.....it was good to annoy you
As you know, I'm just the operator who needs the parts... and tells you what needs to be improved or should be improved...
Can you please show me/us where to insert your PLC?
Danke Danke Danke Uwe
Du bist der beste
Stephan
-
suntravel
- Posts: 2292
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Feature Request - SSV
Stephan,
if you have TeamViewer on your CNC PC, I can do this in a few minutes.
But I hope someone with better knowledge than me is making a version with sine curve acceleration in the PLC, to make the feature independent from servo tunning...
Uwe
if you have TeamViewer on your CNC PC, I can do this in a few minutes.
But I hope someone with better knowledge than me is making a version with sine curve acceleration in the PLC, to make the feature independent from servo tunning...
Uwe
-
Stephan
- Posts: 75
- Joined: Thu May 12, 2022 2:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Feature Request - SSV
Here is my test which is a bit bigger than Uwe's.
80mm part 400 mm long Steel
thanks again Uwe
80mm part 400 mm long Steel
thanks again Uwe
- Attachments
-
- WhatsApp Video 2024-05-27 at 18.12.18.mp4
- (2.75 MiB) Downloaded 12 times
-
suntravel
- Posts: 2292
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Feature Request - SSV
Fine that my offline PLC compilation and SSV worked for you.
Uwe
Uwe
-
Stephan
- Posts: 75
- Joined: Thu May 12, 2022 2:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Feature Request - SSV
I'm still hoping that at some point you'll feel like adding a pecking command to G71.
As I said, thanks again for SSV
Greetings Stephan
As I said, thanks again for SSV
Greetings Stephan
-
Stephan
- Posts: 75
- Joined: Thu May 12, 2022 2:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Feature Request - SSV
Yes, of course Fusion can.
For parts where I don't have to take exact measurements you can use Fusion...
But for example the shaft there I have 2 bearing fits and with things like
that it's easier to change something quickly in the code.
I always have to measure when it comes to 0.01...0.02...0.03 mm.
At Fusion Code I'm always busy searching but in G71, it takes seconds to change and you can jump to line G70 straight away.
For parts where I don't have to take exact measurements you can use Fusion...
But for example the shaft there I have 2 bearing fits and with things like
that it's easier to change something quickly in the code.
I always have to measure when it comes to 0.01...0.02...0.03 mm.
At Fusion Code I'm always busy searching but in G71, it takes seconds to change and you can jump to line G70 straight away.