Need Help with Upgrade Path and PLC

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
RaptorMachine
Posts: 40
Joined: Wed Aug 14, 2019 11:29 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: many
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: Yes
Location: New Jersey
Contact:

Need Help with Upgrade Path and PLC

Post by RaptorMachine »

Hey Guys, now that i have my Servo board repaired and the machine running i would like to upgrade the machine from DOS to Linux.

Reasons,

One, to align it with my other Centroid Mill using Linux and two, to enjoy the added features of USB and networking

M400s serial number 20192

i have attached the report.zip with the current configuration ( currently DOS CNC7 ) and have procured the motherboard that would allow the Linux CNC10 version 2.72 ( MS 6368 )

can you provide the Linux software ? i can install it on the compact flash

PLC originally this system was installed on an unknown mill.. and it was full 3 axis. my intention is to install the elrod kit so i can switch between 2 and 3 axis can you provide me with an updated plc for that ?

once complete i would like to purchase additional unlocks for probing, multiple work offsets, etc. can you provide me with that pricing ?

appreciate all the help

Joe
Attachments
Report.zip
(24.55 KiB) Downloaded 5 times


CentroidFrontDesk
Posts: 1
Joined: Tue Mar 07, 2023 5:51 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Need Help with Upgrade Path and PLC

Post by CentroidFrontDesk »

Joe,

Per our email conversation I am checking into this for you and to see what all might be needed.

I will update you via email when I have more information.


RaptorMachine
Posts: 40
Joined: Wed Aug 14, 2019 11:29 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: many
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: Yes
Location: New Jersey
Contact:

Re: Need Help with Upgrade Path and PLC

Post by RaptorMachine »

thank you for all the help

i have the system up and running with CNC 10 Linux but i have 2 questions.

1: is the motherboard i am using meet the minimum specs. Biostar M6vlr 1 GHZ PIII and 256 ram
2: is there a PLC for the 2 / 3 axis Elrod Z kit ? originally this system was installed on a strictly 3 axis mill

thank you!

Joe


RaptorMachine
Posts: 40
Joined: Wed Aug 14, 2019 11:29 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: many
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: Yes
Location: New Jersey
Contact:

Re: Need Help with Upgrade Path and PLC

Post by RaptorMachine »

BUMP !


Post Reply