Z home position random errors - ABS count error

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Titleiiarms
Posts: 55
Joined: Mon Jul 08, 2019 8:54 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No
Contact:

Re: Z home position random errors - ABS count error

Post by Titleiiarms »

Thats too clean :) Thanks I'll do it . Errors seem to be clear so far today. Rehomed it 20 times. I put a new belt on the Z drive. Seemed good but was a little oily and had some flex I could see on hard motions.
Guy
Titleiiarms
Dilliner, PA
Post Reply