Homing Failure
Moderator: cnckeith
-
- Posts: 8
- Joined: Tue Mar 17, 2015 6:51 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Homing Failure
I bought a running machine and trucked it home, I have it all wired, the computer turns on and I can run the spindle motor but thats a bout it. When it prompts me to push the run cycle button to home it does nothing. Any ideas??????????
-
- Posts: 436
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Homing Failure
Please send a report to tech@ajaxcnc.com so we can better assist you. To generate a report, from the Main Menu press F7 - Utilities, F7 - Report. Support would just need the report.zip generated.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 8
- Joined: Tue Mar 17, 2015 6:51 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Homing Failure
Thanks I actually found the problem pretty quickly, I thank the software for it, the z axis had gone outside the limit switch and the software pointed it out for me. Im gunna love this machine.